My beautiful messenger bag has bit the dust. It was well used but it was time to move on, so I needed a new bag. I came up with something new and fun and I LOVE how it turned out! I’m calling it a Cross Body Tote Bag:
It’s cute and it’s easy and YOU can do it!
Cross Body Tote Tutorial:
- 1 yard of main fabric (you will have leftover) I got my fabric from The Ribbon Retreat
- 1 yard of inner fabric (you will have leftover)
- 1/4 yard of accent fabric
- 1 yard of fusible fleece interfacing
- Tiny piece of felt (optional-for flower)
- Hot glue (optional-for flower)
From main and inner fabrics and fusible fleece cut the following:
- 2 pieces that are 14″ wide by 12″ tall (of each fabric and fleece)
- 1 piece that is 4″ wide by 43″ long (of each fabric and fleece)
For the pocket cut from main and accent fabrics: (optional)
- 1 piece from each fabric that is 10″ wide by 6.5″ tall
Let’s start by sewing the strap. Grab your two long pieces (4 inches by 43). The main fabric should have the fleece ironed on already. Put right sides together and then sew along the two long sides:
Turn that right side out and press it flat, then top stitch along the two long sides. You are done with the strap, so set it aside for now.
If you would like an inner pocket, let’s put that together now. Take your two pocket pieces and place them right sides together. Sew up the top and the bottom. I wanted my pocket a little fancy with the accent fabric showing at the top. To do this, after you have sewn the top and bottom, turn it all right side out and press it flat, BUT, do it so that the accent fabric is showing at the top a little like this:
Get it all pressed how you want it and then turn it back inside out and sew up the two sides but leave a small opening in one spot so you can turn it right side out. Turn it and press it flat again, closing the opening with the ironing. Top stitch the top seam of the pocket to keep it all in place well (see image below).
Now, grab one of your pieces of inner fabric that is 14 by 12 and center the pocket on it and sew around the side, bottom and other side, leaving the top open. I also like to sew a line down the center of the pocket to create compartments:
If you want to create the ruffle, it’s time. Cut a piece of fabric that is about 5 inches wide and about 17 inches long.
Fold it so that right sides are together and stitch up the side:
Turn it right side out and press it so that the seam is centered like this:
That seam will be the BACK of your ruffle.
Now, run a basting stitch up the ruffle. I did two-you can do either one or two. (If you are new to ruffling, here is a tutorial to help you.)
Leave your threads hanging at the end. Grab the top two and gently pull and slide your fabric along it to ruffle the fabric:
Ruffle it to your desired ruffle amount (I just did a little, nothing too fancy) and then pin it in place on the outside of one of your main pieces. Sew a straight stitch right up the middle. You should have some overhanging the top and the bottom. Just let it hang for now.
So pretty right?!
OK, time to assemble the bag.
Grab your two main pieces and place them together with right sides touching. Sew around the side, then the bottom and then the other side. Your ruffle will be hanging out the bottom. You can snip off the excess once you’ve sewn this step:
Now, I added box corners to mine to make it a little roomier inside. This is how.
Take one of the corners of your bag and turn and pinch the fabric so that it ends up looking like this:
Here’s a view of the whole bag so that you can see what I mean better:
Then, sew a straight line along that part to form a triangle tip. Snip off the tip of the triangle:
And that’s it! Do that to the other corner.
Then do all of this to your inner pieces as well. Sew them together and make the box corners.
Now, turn your INNER pieces right side out and slide them down into your main pieces (which are still inside out):
Grab your strap and insert it between the two layers of fabric so that the ends are sticking out like this:
And the strap itself is nestled down inside the bag between the two layers like this: (Make sure it is NOT twisted inside though)
Pin all the way around the top making sure to match up the top of the bag evenly:
And sew all the way around the top leaving a small (about 4-5 inches) opening in one spot (not where the straps are) to turn it. Then, reach through that opening and start to pull the inside out and turn it right side out:
You’ll need to do some nice pressing and straightening now to get it all to lay flat. In particular, press the top well to make sure that the fabrics line up evenly and that you get your opening closed. Then, top stitch all the way around the top. This will sew that opening closed AND make your bag look pretty.
Then, if you want to add a flower, here is a tutorial. Create it and then hand stitch it on and enjoy!
Now, let me tell you what I would LOVE. If you haven’t already, I’d love it if you would join me for my Sew Crazy Monthly Challenge series that I have going this year. A monthly theme, projects to be sewn and prizes to be WON! Find out all about it here: