I’m getting very excited for the Christmas season this year and making this ornament only got me more in the mood. If I allowed myself to listen to Christmas music before Thanksgiving it probably would have even been MORE fun to make this. So, turn on the Christmas music and get ready to make these Jingle Bell Snowflake Ornaments:
I actually got the idea for this ornament from a store bought ornament we already had. I loved it and figured I could probably make it and it turns out that it’s VERY easy to make!
Jingle Bell Snowflake Ornaments Tutorial:
- Jingle Bells-you’ll need 12 of each color. You can choose any color you want-I used red and silver.
- Wire-thicker wire will be easier to work with but any wire will work.
- Glass beads from the jewelry section of the store. Just grab some you think are pretty. You can see that I got some green beads and sparkly silver ones at my craft store. Anything should work as long as it has a hole through it.
- Flat backed jewels (also from the jewelry section) for the center of the ornament (see picture above)
- Hot glue
Cut 6 pieces of your wire about 4-5 inches long. Create a small loop at the end of each wire:
Now begin to string your bells and jewels on. The pattern I used was green jewel, 2 silver jingle bells, silver ball, 2 red jingle bells. To string the jingle bells you will want to put the wire through the little loop on the back of the jingle bell. You’ll find that you can string one after the other and then push them down so that they are right together:
Do this for all 6 of your pieces of wire.
Then, heat up your hot glue and grab one of your flat backed jewels. This part was a little tricky. You want to put some hot glue on the back of your jewel and glue the ends of the wire into it in the shape of a snow flake. I found that it was easier if I used pliers to hold it. Yes, they sort of got glue on them but I could pull that off easily enough. One things to be sure of is that the jingle bells that are right by the jewel (so my red ones) are going up and down by the jewel. See how in this picture you can only see one because the other is below it? That’s how you want it and wedge them up as close as you can to that flat backed jewel.
I just left the wire pieces long while doing this. Get all 6 glued in place. Then trim your wire with wire cutters (if you have them or scissors if you don’t) and glue another flat backed jewel right now top.
Simply add a nice string through one of the loops at the end of one of your 6 points and hang it from your tree!