Sew a hooded towel starting with the basics. You can then make them into fun characters and animals. These are great for babies, toddlers, and kids up to about the age 8.
1bath towel(just about any towel will do. I usually get them at Target or you can search online for your color of choice.)
1/2hand towel (coordinating with the towel)
1 heavy duty sewing machine needleoptional, but it can really help. My machine will sew through this just fine, but be warned, your machine might struggle sewing through several layers of towel. If you break a needle you might want to try getting a heavy duty needle.
Instructions
Start out by cutting your hand towel in half across the short size so that it ends up short and fat. Then, with the finished edge fold it under about 4 inches or so:
And sew that in place:
You can decide which side you want to have on the outside of your hood and which you want inside. If you are doing an animal face you need the underside to be the face. So NOT the part you see above. Flip that over and use the other side. If you are just doing a basic hooded towel, just choose which side you like best. If you are doing an animal towel, you will do the face now. Otherwise, proceed to the next step.
Now, fold the hand towel in half so that right sides are together (meaning your outside part is inside for now). See the image below. The polka dots are the right side of the fabric so I have to fold them together so that they are touching and are on the inside. You are going to do a zigzag stitch up the raw edge to form the hood: (so in this picture you are sewing on the right side).
That’s it. Your hood is done.Now, on the bath towel, on each of the 2 sides fold the edge under about 4 inches and sew it in place: (this has a decorative stitch-you can use that or just a straight stitch).
Now, find the center of your towel on the long side. You are now going to form a little pleat that looks like this. To do that you are just folding about 1 inch in from each side and pinning it in place:
Zigzag that pleat into place.
Now you need to attach your hood to your towel. Center the hood so that the seam of the back of the hood matches up with the center of the pleat you just made. Pin the rest of the hood in place along the top of the towel and then zigzag it in place: